Nostalgia Fiberglass Body
by
If you have a question about this part, please email us at question2@bugsandbuggies.com or call 1-800-303-6211, Monday-Friday: 9am-3pm ET and Saturday 9am-3pm ET. (517-625-1884 from outside the U.S.)
Due to the volume of email we receive, it may take us a few days to answer your question. For time-critical issues, please call us at the above number.
|
|
| Available Nostalgia Body Colors |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Aqua
|
Flame Red
|
Blue
|
Bubble Gum
|
Canary Yellow
|
White
|
Lime Green |
Black
|
Orange
|
Nostalgia Fiberglass Body
-
Use with the custom Berrien square tube chassis or will fit a VW Beetle
chassis, shortened 14-1/2"
-
Beautiful gel coat finish comes in several colors
-
A hardtop, Flat Side Panels and Bubble Side Panels are available in gel
coat colors matching the body
-
The Hardtop is available with an oval rear window and 6" port hole windows
in the side
-
A Softtop will soon be available
-
The Dash has plenty of room for gauges and switches
-
The Hood and Dash come glassed together
-
Uses a stock VW Beetle fuel tank
-
Carries 4 people
|
Tubular Steel Chassis for
Nostalgia Body
-
Square Tubing Chassis - 2" Main Frame 1-1/2" Infrastructure
-
Body mounting holes are pre-drilled and recessed so that bolts do not protrude
below the chassis
-
Any other body made for a 14-1/2" shortened floorplan will fit this chassis
-
Saves time and is an easier to assemble buggy than with stock VW floorplan
-
Brackets are installed for Pedal, Master Cylinder and Front Brake Hoses
-
Includes Emergency Brake Handle Bracket and Shift Tube Bracket with Bushing
-
Tubes are installed or included for throttle, clutch and emergency brake
-
Uses either IRS or Swingaxle Torsion, Exchange
-
Available for either Balljoint or Link/King Pin
-
More tire clearance than stock VW chassis
-
Stronger than the VW Chassis
-
Torsions are sandblasted and capped
|
Fiberglass Floor for Nostagia
Body
-
Shiny black finish
-
Made of Fiberglass
-
Won't rust and doesn't need painting
-
Uses stock cables, shifter, pedals and emergency brake
-
Appears as a stock VW floorplan
-
Ribbed design makes it stronger
|
|
|
PLEASE NOTE:
Shipping for frames and fiberglass bodies is calculated separately and sent to the customer for approval. It is NOT included in the shipping total for your shopping cart order. If you can not take delivery at our Detroit, Michigan, USA location, shipping charges may range from $400-$1000 or more for assembled chassis. The WARRIOR Chassis Knock-down kit ships for around $125, depending on your location inside the United States. For a fully welded chassis, there is an additional $100 core charge for the torsion assembly, assuming you do not provide us with an exchange torsion. For partially tacked chassis, there is an additional $50 charge for welding in place an optional torsion assembly, plus $125 core charge. Also, we recommend you order an IRS rear end with your chassis, since this gives you the most flexibility. Please email
us or call us at 1-800-303-6211 (Tuesday-Saturday, 9am-5pm EST) with any questions.
|
